HIKOKI DH 18DPB Bedienungsanleitung Seite 9

Power Output
Wh
2 to 3 digit number
NAMES OF PARTS (Fig. 1–Fig. 17)
Handle
Pushing button
Switch trigger
Change lever
Name plate
Depth gauge
Drill bit
Front cap
Grip
Housing
LED light
Side handle
Motor
Battery
Display panel
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DH18DPB: Cordless Rotary Hammer
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in accordance
with national law, electric tools that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Changeover switch
Display lamp
Auto stop lamp
Indicator lamp
Latch
Pilot lamp
Indicator lamp: Lights
Grease
Auto stop lamp: Blinks
Auto stop lamp: Lights
Battery sliding
grooves
Terminal (Product)
Air gun
Terminal (Battery)
Sliding grooves
9
V Rated voltage
n
No-load speed
0
Bpm Full-load impact rate
φ
Drilling diameter, max.
max
Weight*
(According to EPTA-Procedure 01/2014)
kg
Concrete
Steel
Wood
Rotation only function
Rotation and hammering function
Switching ON
Switching OFF
Low mode
Normal mode
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
* Depending on attached battery. The heaviest weight is
measured with BSL36B18 (sold separately).
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 86.
Standard accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
○ Drilling anchor holes
○ Drilling holes in concrete
○ Drilling holes in tile
Rotation only function
○ Drilling in steel or wood
(with optional accessories)
○ Tightening machine screws, wood screws
(with optional accessories)
English