Installation; General Description - Omnitronic BD-1350 Bedienungsanleitung

CAUTION!
The RCA-connection plugs must never be connected with the Phono-inputs of your mixer!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

4. INSTALLATION

Install the turntable on a plane, stable ground.
Place the platter on the holder.
Turn the platter until the rectangular whole is at approx. 20°. Connect the belt with the driving pinion.
Place the slipmat on the platter.
Remove the hinges from the bottom side of the styrofoam. Install the dust-cover on the two hinges.
Remove the pickup-system from the cartridge holder and screw it on the tonearm.

5. GENERAL DESCRIPTION

12