Klarstein 10009872 Bedienungsanleitung Seite 16

Fault Possible cause Elimination
There are too many residues in
Clean the middle ring; or
There is a little juice. the middle ring; or The pushing
Gently push the pushing rod.
rod is pushed violently.
Disconnect the power supply,
The cutter holder is wound or
The cutter holder is seized. take out the food materials and
seized by food materials.
cut them into smaller blocks.
Notes: The table above introduces the common faults and their cause analysis and elimination methods.
For other faults, contact our customer service department or have the product repaired by a designated
service center of us directly. Do not dismantle or repair the product by yourself.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
16