Replacement Of Filter; Anti-Calc-System; Emptying And Storing; Cleaning And Maintenance - Klarstein 10006681 Bedienungsanleitung

1. Unique design for cord storage of base unit provide not only beautiful features, but also easy
storage:
2. After use, unplug the unit from main socket, pour out the remaining water from water tank after the
unit has been completely cooled down.
3. Place iron on base unit, fold supply hose and wind it clockwise around the cord slots of the base
unit. Tie power cord and folded supply hose together,then wind power cord clockwise around the
cord slots of the base unit, and lock the plug with supply hose. (Fig.11 - Fig.14)
Method: Slide water tank out from base unit, take the filter out from water tank, and then replace with a
new one. After new filter has been installed well into water tank, fill water into water tank to Max fill level,
and then slide water tank back into base unit.(Immerse filter in water for several minutes in order togain
better performance in future use.)
1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will
prolong the working life of your iron. However, please note that the filter will not completely stop
the natural process of limescales build-up.
2. The filter should be replaced with a new one after 2-3 months, in case of using one time each day.
Working life of the filter depends on water you used. Before replace, the filter can still be used
continuously. However, limescales may be most probably built up in steam chamber. This happens
always depending on your local water quality. I t is proposed that replace filter as soon as possible
or mix your water with 50% proportion of distilled water.
1. Disconnect the appliance from the power supply and allow the appliance to cool down for 60
minutes at least.
2. After use, slide out the water tank and pour out all the remaining water.
3. Wind the power cord around cord storage of the base unit.
4. The iron should be placed on the iron rest plate, lay handle down.
1. Unplug the appliance from the main supply and let the iron cool down.
2. Clean the iron with a damp cloth.
Cord Storage (optional)
Note: G-1033STB-90 does not have thisfeature.

Replacement of filter

Anti-calc-system

Emptying and storing

Cleaning and Maintenance