Salda FLEX RIS 1500 PW 3.0 Bedienungsanleitung Seite 27

EN
II III. Mounting
Surface mounting, opening is prepared at the wall for the connection cable d13 and two holes for installation
of the box bottom.
43
d13
43
Attach the box bottom cover to the wall leaving approx. 3 cm of cable from the surface. Put the battery to the
socket at the board, polarity "+" outwards, connect the plug to the board and close the box cover (see the draw-
ing) by attaching the left side (1–2) and then gently press the right side (3). Connect the other cable plug to the
socket of the recuperator (RS485_1).
IV. Contents
Control panel FLEX
Battery, 2032 type
Communication cable RJ11 to He1402 (4 strands), 13 meters 1 piece
22
d4
30 30
86
Mounting drawing
2 2 1 1
Assembly drawing
1 piece
1 piece
3 3
www.salda.lt