Technical Data; Troubleshooting - Klarstein 10021712 Bedienungsanleitung

Input voltage: 220-240V~
Frequency: 50Hz
Power: 150W
Speed: 80rpm
Max. Operation time: 30 minutes
Problem
No power to juicer
Motor has stopped
Leaking from beneath
the bowl.
Stain on the bowl,
Strainer, Spinning
brush.
Squeaking noise
during operation.
Damage to the
strainer.
CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin.

TECHNICAL DATA

TROUBLE SHOOTING
Possible Causes
Juicer not plugged in
Incorrect assembly
Bowl has been overfilled with material Press the reverse power button to try
Overuse has caused the motor to shut
down as a precaution to overheating
Rubber plug on base of bowl not cor-
rectly inserted
Natural color from juicing materials
Juicing noise from squeezing screw
Frozen foods, ice, pips, seeds, unk-
nown substance or too much material
in the bowl.
What To Do
Check the juicer is plugged in
Reassemble the juicer according to
the instructions
and clear the clog. May need to be try
this a few times
Switch off and let the motor cool befo-
re using aging
Rubber plug on base of bowl not cor-
rectly inserted
This is perfectly normal. To reduce dis-
coloration ensure you rinse and clean
the appliance immediately after use
This is perfectly normal. Ensure you
do not overload the juicer
Ensure you read the instructions care-
fully on the correct use of the juicer.
Do not overfill the juicer
12