8. Insert the ignition key into the
Key Cylinder 1.
Check that there isn't protrusion
of the tumblers 3 ("A", "B", "C",
"D", "E").
9. Pull out the ignition key from the
Key Cylinder 1.
NOTE
If the Tumbler 3 is set in incor-
rect condition, push it by -
driver from opposite side as
shown.
NOTICE
Take care of injuring.
Protrusion (NG)
GENUINE SUZUKI ACCESSORIES
Correct position
Ignition Key
Incorrect position
Protrusion (NG)
7/9