Listo RCL170-55mib2 Bedienungsanleitung Seite 4

REVERSING THE OPENING DIRECTION OF THE DOORS

1. Make sure that your refrigerator is unplugged.

2. Pry the hinge cover up and off, remove the three screws that secure the upper hinge

to the door, then remove the hinge.

3. Remove the refrigerator compartment door from the cabinet.

4. Remove the two screws that secure the center hinge.

5. Remove the freezer compartment door.

6. Remove the screws that secure the lower hinge to the right side of the cabinet,

then remove the hinge.

7. Remove the washer and nut that secure the pin shaft to the right hole on the

lower hinge, then remove the shaft

V.1.0

Hinge cover

Screws

Upper hinge

Refrigerator compartment door

Center hinge

Screws

Lower hinge

Screws

Pin shaft

8. Insert the pin shaft into the left hole on the lower hinge, then secure the shaft with

the washer and nut.

9. Install the lower hinge on the left side of the cabinet.

10. Remove the screw that secures the door stop from the bottom right of the freezer

compartment door, then remove the door stop and install to the bottom left side.

Freezer door

11. Install the freezer compartment door.

12. Move the door bushing from the top right side of the freezer door to the top left

side of the door. And move the left hole cover to the right side.

Door bushing

13. Remove the center hinge screw hole plug on the left side of the cabinet, then

install in the screw holes on the right side of the cabinet.

14. Install the center hinge to the left side with the two screws you removed previously.

Pin shaft

Door stop

Hole cover

Screw hole plug

V.1.0