Reflexion LEDW190+ Bedienungsanleitung Seite 64

Programm Edit
Signal Information
CI- Information
5V antenna power
LCN
Software Update
(USB)
PICTURE
In the picture menu you can adjust and save the picture settings according to your needs.
1. Press the
2. Use the
3. Press the button to enter the Picture menu.
4. The following menu items are available in the Picture menu:
Picture Mode
Fine Tune:

Press the
Red button:

Delete selected station.
Yellow button:

Move a selected channel to the desired position. LCN must
be set to Off.
Blue button:

Lets you skip the marked station when switching through.
FAV:

Marks the selected station with a heart.

Press the
the favorites list.
Button 0:

Delete the complete channel list.
Shows reception information of the selected station. Only active
if a station has been found.
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
Set the 5V antenna power for external antennas at the
connection "TV2 DVB-C / T2HD)" On or Off.
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the Programm edit menu.
Start the software update.
button to open the TV menu.
buttons to select the Picture menu item.
The following preset picture modes are available in Picture
Mode.

Standard (Fixed picture settings.)

Dynamic (Fixed picture settings.)
64
or buttons to fine tune the frequency.
button when the menu is closed to open
UK