Reflexion LEDW190+ Bedienungsanleitung Seite 62

Programm Edit
Signal Information
CI-Information
5V antenna power
LCN
Software Update
(USB)
Auto Tuning
Search:

Press the or
Fine tune:

Press the or
Red button:

Delete selected station.
Yellow button:

Move a selected channel to the desired position.
Blue button:

Lets you skip the marked station when switching through.
FAV:

Marks the selected station with a heart.

Press the button when the menu is closed to open
the favorites list.
Button 0:

Delete the complete channel list.
Shows reception information of the selected station. Only active
if a station has been found.
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
Set the 5V antenna power for external antennas at the
connection "TV2 DVB-C / T2HD)" On or Off.
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the Program edit menu.
Start the software update.
DVB-C
Starts the automatic station search.
Scan Mode:

Full

Network scan
Frequency (KHz):
Only available if the search mode is set to Network Scan.

Auto

Manually
62
button to start the search.
button to fine tune the frequency.
UK