Honeywell TP-FIT-D-WK Benutzerhandbuch Seite 12

USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
POWER CONTROL
Press to switch the dehumidifier ON or OFF.
DISPLAY SCREEN
When the unit is switched ON, the Display Screen shows the current humidity percentage and
previous mode setting.
MODE SETTING
Settings: Laundry Mode, Dehumidifying Mode, Comfort Mode & Continuous Mode.
The corresponding indicator light will illuminate to indicate the current mode setting.
Dehumidifying Mode
Press or to adjust your preferred humidity level. Set the desired humidity in % by pressing
button, it will increase in increments of 5%. The adjustable Relative Humidity (RH) range is between
30% RH to 90% RH. Two seconds after setting the preferred humidity setting, the display will revert
back to displaying the current humidity,
Dehumidifier maintains a balanced low speed for whole room dehumidification.
Adjust humidity level as desired (30%RH to 90%RH).
Laundry Mode
Adjust desired humidity level by pressing or as described in Dehumidifying Mode .
Dehumidifier runs on high for more powerful dehumidification intended for drying clothes. Hang wet
clothing in the same room as the dehumidifier, taking care not to allow wet clothes to be hung over
the dehumidifier or cause any water to drip onto the dehumidifier.
Close windows and doors for faster laundry drying.
EN 11