Herunterladen Diese Seite drucken

hillvert HT-HECTOR-120A Bedienungsanleitung Seite 35

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Place the machine on a level, horizontal surface.
Unscrew the orange engine oil filler plug (with a built-in dipstick - see
the picture above) and pour the oil through its opening (use a funnel),
taking care not to overflow above the permissible level (marked area
on the dipstick), which you check on the dipstick after it is fully hidden
in the hole.
It is recommended to keep the level closer to the upper than the lower
acceptable limit. In case of overflowing beyond the permissible level,
excess oil can be sucked out through the plug hole.
ATTENTION: operating the engine with the wrong oil level can lead to
engine damage! Check the engine oil level before each machine
operation when the engine is still cold.
REFUELING
ATTENTION: The engine of the device is designed only to burn unleaded gasoline
without oil admixtures. The use of other, stale, with too high an ethanol content or
low-quality fuel, can lead to engine failure. Refuel only with the engine off, paying
close attention not to spill fuel over the engine, especially when it is hot - risk of fire!
If the engine is warmed up, wait at least 2 minutes before refueling.
Place the machine on a level, horizontal surface.
The fuel tank is located on the top of the unit.

Werbung

loading

Diese Anleitung auch für:

Ex10090437