EuroLite LED BR-100 Bedienungsanleitung Seite 22

Occupation of the DIP-switches:
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
Now you can start operating the LED BR-100 via your lighting controller.
DMX-protocol
Control-channel 1 - Rotation
Value
000 - 007 No rotation
008 - 123 Clockwise rotation with increasing speed
124 - 131 No rotation
132 - 247 Counter clockwise rotation, decreasing speed
248 - 255 No rotation
Control-channel 2 - LED effects
Value
000 - 035 Dimmer
036 - 070 Strobe
071 - 105 Fade
106 - 140 Color-change
141 - 175 Color-change + strobe
176 - 210 Cross-fade
211 - 255 Cross-fade + strobe
Control-channel 3 - LED Speed
Value
000 - 255 Increasing speed
Control-channel 4 - Red
Value
000 - 255 Red (0=off, 255=100% red)
Control-channel 5 - Green
Value
000 - 255 Green (0=off, 255=100% green)
Feature
Feature
Feature
Feature
Feature
22/24 00054364.DOC, Version 1.1