Herunterladen Diese Seite drucken

Sygonix EG-6638 Bedienungsanleitung Seite 37

Lokales klimagerät

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The sleep mode only works in "air conditioner" mode. Sleep mode is automatically switched off when the
condensate tank is full (the water level symbol appears in the LC display) or when the appliance is switched
to standby mode.
g) Timer (TIMER)
It is possible to switch the appliance on and off automatically. You can set the amount of time until the appliance
switches on automatically from standby mode or until it switches off while the appliance is on.
Automatic switching on in standby mode
• The appliance is switched off and in standby mode.
• Press the
TIMER button ( ) on the appliance or the
interval (1 - 24 hours).
• Press the TIMER
necessary, until the desired switching time is set.
• To view a set switching time, briefly press the
remote control. The switching time will be displayed.
• The appliance switches on automatically after the preset time has elapsed.
Automatic switching off while the appliance is in operation
• The appliance is switched on.
• Press the
TIMER button ( ) on the appliance or the
interval (1 - 24 hours).
TIMER button ( ) on the appliance or the
• Press the
necessary, until the desired switching time is set..
• To view a set switching time, briefly press the
remote control. The switching time will be displayed.
• The appliance switches off automatically after the preset time has elapsed.
h) Auto shutdown when the condensate tank is full
This product has an automatic evaporation system. This re-uses the condensate for air conditioning to save energy
and increase the cooling
• If the condensate tank is full, An alarm sounds, the compressor and all operating keys will be locked. This status lasts
until the condensate tank is emptied. Please refer to chapter 15. Maintenance a) Emptying the condensate tank.
• Unplug the plug in mains socket after the auto shutdown to reset the appliance. Insert the mains cable with plug
back into the socket again. Press the
button ( ) on the appliance or the
POWER button (16) to switch the appliance on again.
button (H) on the remote control to set the desired time
button (H) on the remote control, several times if
TIMER button ( ) on the appliance or the
button (H) on the remote control to set the desired time
button (H) on the remote control, several times if
TIMER button ( ) on the appliance or the
button (H) on the
button (H) on the
37

Werbung

loading

Diese Anleitung auch für:

2182195