Sygonix EG-6638 Bedienungsanleitung Seite 33

c) Installation
Fig. A
• First, extend the air outlet hose ( ) from the end without connecting parts. Attach the window channel adaptor ( )
to the air outlet hose ( ) by screwing it anti-clockwise onto the air outlet hose ( ) (Fig. A). The air outlet hose ( )
can be extended and bent into the desired shape.
• Then screw the connection side of the air outlet hose ( ) to the air outlet (14) by tightening it anti-clockwise
(Fig. B). Turn in the direction of the "lock" arrow. To loosen the air outlet hose ( ) turn it clockwise in the direction
of the "unlock" arrow.
• Place the appliance near a window or a door. If required, extend the air outlet hose ( ) carefully. It is recommended
that the length of the hose is kept as short as possible.
•
windows.
• If the window is too narrow for the window channel ( ), remove the inner part of the window channel.
• Shorten the inner part of the window channel ( ) to the desired length. The window channel adaptor ( ) must not
partially or fully cover the slot opening when installed.
• Place the inner part in the outer part of the window channel ( ) and extend the window channel ( ) to the required
length on the window.
• If necessary, attach the window channel ( ) with screws as well. Ask an expert for advice.
• After the window channel ( ) has been mounted on the window, tighten the wing screw set ( ) so that the inner
and outer parts of the window channel are locked together.
•
• Now guide the window channel adaptor ( ) into the window channel opening (Figure C).
• When routing the air outlet hose, follow the instructions in section d) Air outlet hose position.
Fig. B Fig. C
33