Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10. Installation, mounting and connection
a) Installation
Fig. 1
b) Pre-assembly of the window channel
Install the window channel following the steps below:
Fig. 2
32
• Place the appliance on a stable and level dry surface.
Ensure that the appliance is placed in a secure position so
that it cannot fall or start rolling by itself.
• The product must be free with a gap of at least 50 cm to
other objects or obstacles. The air outlet openings (2) must
be directed into the room. See Fig. 1.
• The product should also be installed as far away from heat
sources as possible.
• Separate the wing screw set (27) in its component parts.
• Pull the inner part of the window channel ( ) out until the
drill hole in the outer part is exposed. Run the screw through
the drill hole (Fig. 2) paying attention to the direction.
•
must be inserted lengthwise into the inner part guide rail.
Werbung
