ELRO BABY MONITOR ROYALE XL TOUCH SCREEN Bedienungsanleitung Seite 6

Monitor symbols
•
Signal indicator: indicates the strength of the signal that is received from the camera.
•
Digital clock: shows the time
that is set on the monitor.
•
Camera display indication.
•
Night light on/off.
•
If you are using the app on
your smartphone, this
symbol will turn white.
•
Zoom mode, indicates the
zoom factor, to 1.5 times and
2 times.
•
Monitor speaker. If the
symbol is white, the speaker
is off. If it is grey the speaker is
on.
•
Battery status:
•
Flashing: the battery is almost dead.
•
1 bar: the battery has a quarter charge.
•
2 bars of white: the battery has half a charge.
•
3 bars of white: the battery is 3 quarters charged.
•
4 bars of white: the battery is fully charged (the adapter is not connected).
•
4 bars of white and lightning bolt: the battery is fully charged (adapter is connected).
•
Lightning bolt icon: the adapter is connected.
•
Temperature display of the room in which the camera is placed.
•
Timer with alert signal for feeding times.
•
Quad screen: press this button to switch to quad screen. When two cameras are linked the
screen is split in 2 (split screen). If more than two cameras are paired, there are four different
displays shown. Up to a maximum of 4 cameras can be paired.
•
Microphone: hold this button to talk through the camera.
Getting started
1 The monitor must be fully charged by the adapter or the charging station before use. The
camera has to be powered by the adapter at all times.
2 Place the camera in a desired position. You can place the camera on a table/cabinet or mount
it to the wall using the mounting bracket.
3 Press the on/off button for approximately 4-5 seconds to turn on the monitor.
4 Slide the on/off switch to the ON position to turn on the camera.
- 6 -