ELRO BABY MONITOR ROYALE XL TOUCH SCREEN Bedienungsanleitung Seite 18

•
My camera is out of range.
o
Make sure the antenna of the monitor is fully extended when using the system.
This will result in an optimal range of the baby monitor.
•
I'm unable to connect the camera with my smartphone.
o
For the installation of the app you need to have a pure 2.4GHz wifi signal. This
means that you cannot use a combined wifi signal that transmits both 2.4GHz and
5GHz. Before the installation, the 5GHz signal must be temporarily switched off.
After the installation, the 5GHz signal can simply be switched back on again.
o
Another possibility is to create a separate 2.4GHz 'guest network'.
o
Do not open the app again until the camera light is off.
•
I can't see the wifi that the camera sends out on my phone.
o
If the wifi name does not appear in the wifi list, you can use the alternative
connection method explained earlier.
•
I can't watch the camera's live view when using 4G.
o
Use a separate 2.4GHz wifi signal. This is usually a 'calmer' connection.
•
Is my baby monitor secure?
o
Yes, the baby monitor uses FHSS. This means that the frequency jumps every few
seconds, making it difficult for a third party to pick up the signal.
o
It is only possible to install the baby monitor in the app if you are in the vicinity of
the camera. This prevents any approach by external parties. Moreover, the app
forces you to create a secure password which is difficult to crack by outsiders.
o
Furthermore, no personal data is stored, which makes the use of the system extra
secure.
- 18 -