ELRO BABY MONITOR ROYALE XL TOUCH SCREEN Bedienungsanleitung Seite 17

Firmware update
The camera's firmware is updated regularly to improve the security and functionality of the
camera. It is therefore important that you check every now and then whether a new firmware
version is available. You can check this by following the steps below.
1 Open the ELRO Babycam app
2 Go to the settings of the camera
3 Press 'Firmware Upgrade'
4 The app will now check if a new version is available. If there is, the new version will be
installed. If not, a message will appear informing you that the camera has the latest firmware.
Mounting of the bracket
Mounting the camera wall bracket is very easy thanks to the screws and plugs provided in the set.
1 Mark where the 2 holes are to be drilled.
2 Drill holes in the wall with the same diameter and length as the plugs.
3 Push the 2 plugs into the drilled holes.
4 Screw on the mounting plate.
Frequently asked questions (FAQ) and troubleshooting
Are you having problems with the installation of this device? Please visit
quick answer to your question. Here you will find the latest version of the instruction manual,
answers to frequently asked questions (FAQ) and detailed installation videos.
- 17 -
www.elro.eu/faq to get a