Setting Up The Neoscan 2000; Setting Up The Scanner - Neoss NeoScan 2000 Installations- Und Bedienungsanleitung

3 – Setting up the NeoScan 2000

Setting up the scanner

To set up the scanner, follow these steps:
• Visit www.neoss.com/neoscan/download and download the installation file and instructions
according to the product model.
• Double-click the software installation file.
• Choose a language from the drop-down list and click Ok to install.
• Follow the instructions on the screen to complete the installation.
• Firmly slide the Scanner Tip onto the end of the scanner.
• Short press any button to start the scanner.
• After the scanner is powered on, open the software and connect the scanner through the wireless
network.
Using the scanner charging holder
The Charging Holder can be used standing on a flat plane or mounted on the wall.
1 0 NeoScan™ 2000 Installation and operation manual // Setting up the NeoScan 2000