Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Example: #11335577
Result: Public Use is now enabled.
SET NETCODE
To set up a NetCode lock and generate
NetCodes, an internet connection is required.
Visit www.codelocksconnect.net. If you do not
have an account, you will need to register.
Once signed-in, follow the prompts to Add a
New Lock.
ADD OR CHANGE A USER CODE (PRIVATE
FUNCTION)
#Master Code
User Code
Example: #11335577
Result: The User Code in position 01 has been
changed to 1234.
Note: Up to 20 User Codes can be added. Use
Program 03 to delete User Codes.
KEY OVERRIDE
An override key is available for purchase
separately*. The override key allows access
to the locker or cabinet. The lock handle will
not rotate. If the Master Code has been lost,
the Lost Master Code process will need to
be followed. Refer to the full Programming &
Operating Instructions on our support website.
*Proof of KL1000 G3 NetCode purchase may be required.
INSTALLATION INSTRUCTIONS
Replacing an existing cam lock
1. Remove existing cam lock.
2. Place the template on the door, lining up the
16mm (5/8") spindle hole over the original
cam lock hole and mark the fixing hole.
3. Drill the 6mm (
4. Fit the KitLock to the door.
5. If required, use the packing pieces (supplied)
to centralise the lock.
6. Secure the lock to the door with the large
fixing nut.
7. Fit the upper fixing bolt.
8. Select and fit cam using the fixing nut and
•
02
•
User Position (01-20)
••
/
") fixing hole.
1
4
•
24
••
•
02
•
01
•
2 2
•
1234
••
Werbung
