CODELOCKS KitLock KL1OOO G3 NetCode Kurzanleitung Seite 2

Getting Started Guide
Before use, two AAA batteries must be fitted
by rotating the handle, removing the security
screw with the star drive tool provided and
sliding the top cover away from the handle. The
KL1000 G3 NetCode is supplied with a factory
set Master Code (11335577) and the Public
Use function enabled. In this function, the lock
will remain unlocked until a user enters their
own 4 digit User Code to lock. On re-entry of
the same 4 digit code, the lock will unlock until
the next 4 digit code is entered.
CHANGING THE MASTER CODE
#Master Code
Master Code
Example: #11335577
12345678
Result: The Master Code has been changed
to 12345678.
Full Programming & Operating Instructions
and Installation Instructions are available on
our support website: codelockssupport.com
FUNCTIONS
Three functions are available: Public Use
(enabled by default), Private Use and NetCode.
By enabling Private Use, the lock will remain
locked until a valid 4 digit User Code is
entered. On entry of a valid User Code, the
lock will open and remain open for 4 seconds.
Enabling NetCode will allow you to remotely
generate time sensitive codes.
SET PRIVATE USE
#Master Code
Example: #11335577
Result: Private Use is now enabled. The
default User Code is 2244. Use Program 02 to
add or change User Codes.
SET PUBLIC USE
#Master Code
• 01 •
••
••
• 26 ••
• 24 ••
New Master Code
• 01 • 12345678
• 26 ••
1 1
• New
•