Oleo-Mac GS 180 E Bedienungsanleitung Seite 34

I
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
GB
or harsh cutting conditions are present the suggested intervals should be
shortened accordingly.
F
Complete Machine
Controls (on/off switch, safety
button)
D
Chain Brake
Oil Tank
E
Chain Lubrication
Saw Chain
SK
P
Guide Bar
GR
TR
Rim Sprocket
CZ
All Accessible Screws and Nuts
Motor crankcase louvers
RUS
Power cable
UK
PL
9. STORAGE
If the machine is to be stored for long periods:
- M ake see that the elec trical plug is
disconnected from the mains.
- Follow all the maintenance regulations
described above.
- Completely empty the tank of chain
32
MAINTENANCE CHART
Inspect (Leaks, Cracks, and Wear)
Check Operation
Check Operation
Check by Dealer
Inspect (Leaks, Cracks, and Wear)
Check operation
Inspect (Damage, Sharpness, and Wear)
Check Tension
Sharpen (Check Gauge Depth)
Inspect (Damage, and Wear)
Clean Bar groove and Oil Passages
Rotate, Lubricate Sprocket Nose and
Deburr
Replace
Inspect (Damage, and Wear)
Replace
Inspect - Retighten
Clean
Inspect (Damage, and Wear)
- Run the machine empty to completely
- Clean the saw thoroughly.
- Put the blade-cover on. Store the saw in a
X
X
X
X
X
X
X
X
X
X
lubricant and close the cap
empty also the delivery pipe and the oil
pump.
dry place, preferably off the ground, and
away from heat sources.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X