Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Indication of Parts
2. Instruction for use
Setting the Temperature Control
•
•
•
3. Instruction for use
Note
•
Position your refrigerator so that the plug is accessible.
•
Keep your refrigerator out of direct sunlight.
•
Do not place next to heat generating appliance.
Do not place directly on the ground. Provide suitable stand.
•
Very important
•
The refrigerator will have better performance at ambient of 20-25°C; We suggest the refrigerator be
powered off if the ambient temperature is lower than 10°C.
•
After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage into the
refrigerator compartment.
Ventilation is very important for this kind thermoelectric refrigerator; The inside PCB will be broken
•
easily if the ventilation is bad; It will also reduce the life of the refrigerator.
If leakage occurs (which can be easily detected due to the unpleasant smell), please
•
o
A: Switch off the refrigerator immediately
o
B: Ventilate the room thoroughly
o
C: Call for the after sales service department
•
The refrigerator applies automatic defrosting system, so there is no need to defrost it manually.
Power supply
The refrigerator must be connected to a properly earthed socket in line with relevant valid country
•
regulations before operating;
•
Check the data label (which is on the side of the refrigerator) for voltage and frequency corresponds to
your local one; If not, don't plug your cable into the socket;
Your refrigerator has only one control for regulating the temperature.
The temperature control is located on the top of the refrigerator inside.
To control the internal temperature, adjust the control knob according to the ambient
temperature or purpose of use.
The range of the temperature control is from position "0" to "3".
www.combisteel.com
4
Werbung
