Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Water inlet hose(for cold water)
Connect the inlet hose to a connector with a 3/4 inch
thread firmly and securely. When the hoses are new
or were not used for an extended period of time, let
the water flow until the hose is clear of any
contamination. NOTICE! Otherwise the water inlet
may be blocked and the appliance will be damaged.
If the drainage hose is longer the 4 m. the dishes will not be cleaned properly .
Check that the connection does not leak. Fix the outlet hose with a hose-holder.
2.3 Electrical connection
You need a properly grounded and dedicated safety
socket relevant to the plug (250V/10A).
WARNING Otherwise serious accidents
may occur or your appliance may be
damaged.
2.4 Proper levelling
You can level the appliance using the two adjustable front feet. The inclination
must not exceed 2 degrees.
Wastewater hook-up. Fit
the drainage hose of your
appliance to the drainage
pipe without bending.
If the length of the hose is
not sufficient, apply to your
authorized service for an
extension made from the
same material as the original
hose. Remember that the
length of the hose (including
extension)
exceed 4 meters.
41
should
not
Werbung
