Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Access Camera
For initial access to the IP camera, the camera can be searched for using the
"DeviceSearch.exe" installation program. Download under:
Accessing the Camera by Device Search Software
Step 1: Double click on the program Device Search.exe.
Step 2: After its window appears, click on the <Device Search> button on the
Step 3: Find the camera in the list by its IP address and click on it. The default
Step 4: The default IP address of the camera may not be in the same LAN as
Step 5: The <Network Setup> page will come out. Select <DHCP> and click
Step 6: Click <OK> on the Note of setting change. Wait for one minute to re-
Step 7: Click on the <Device Search> button to re-search all the devices. Find
Step 8: A prompt window requesting for default username and password will
User manual
top. All the finding IP devices will be listed in the page.
IP address of the camera is: 192.168.0.250.
the IP address of the PC. If so, the IP address of the camera needs to
be changed. Right click on the camera and click <Network Setup>.
Meanwhile, record the MAC address of the camera, for future
identification.
<Apply> down the page. The camera will be assigned with a new IP
address.
search the camera.
the camera in the list by its MAC address. Then double click or right
click and select <Browse> to access the camera directly via a web
browser.
appear. Enter the default username and password shown below to
login to the camera.
Login ID
root
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator's password be altered
for the security concerns.
Password
admin
58
Back to the
table of contents
DeviceSearch.zip
Werbung
