Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.4
Connectors
The diagram below shows the IP Camera's reset button and various
connectors. Definition for each connector will be given as follows.
No.
1
BNC
2
Alarm I/O
3
Power LED
Power
4
(DC 12V/AC 24V) &
RS-485
5
Default Button
6
microSD Card Slot
Audio I/O
7
(Line In/Out)
8
Auto Iris
9
PoE Network
10
Network LEDs
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
User manual
ABF Models
Connector
Pin
-
1
2
3
4
5
6
7
-
1
2
3
4
-
-
-
-
-
-
56
Definition
For analogue video output
Alarm In 2 +
Alarm In –
Alarm In 1 +
Alarm Out 1 –
Alarm Out 1 +
Alarm Out 2 –
Alarm Out 2 +
For power connection indication (green light)
DC 12V + AC 24V 1
DC 12V -
AC 24V 2
D +
D –
Press the button with a proper tool for at least 20
seconds to restore the system.
Insert the microSD card into the card slot to store
videos and snapshots. Do not remove the microSD
card when the camera is powered on.
Two-way audio transmission
ABF Model: Auto Iris Lens Connection
For network and PoE connections
For network connection and activity indication
Back to the
table of contents
Remarks
Alarm connection
#Do NOT connect external
power supply to the alarm
I/O connector of the
camera.
Power connection
RS-485 connection
Werbung
