VARON NT-2 Bedienungsanleitung Seite 5

Technical Parameters
1.Model NT-2
：
2.Power supply：DC12 16.8V AC100 240V
～
3.Power：68W
4.Battery capacity：92Wh/6.4Ah
5.Flow gear：1～5gear (the flow is highest at 5 gear)
6.Oxygen concentration：93%±3
7.Noise level：≤58dB(A) (noise value at the highest gear)
8.Dimensions：18.2*9.1*25.7cm/7.16*3.58*10.12''
9.Net weight：2.2kg
10.Electrical classification：Class II
11.Oxygen supply mode：pulse oxygen supply
12.Normal working environment：
Ambient temperature range: 10℃～35℃;
Relative humidity range: 30%～75%;
Atmospheric pressure range: 860hPa～1060hPa;
Note: When the storage and transportation temperature is lower than 5℃ , the
equipment should be stored at normal operating temperature for more than 4
hours before using.
13.Storage and transportation environment：
Ambient temperature range: -20℃～60℃;
Relative humidity range: 10%～93%, and there is no frost phenomenon in
the environment;
Atmospheric pressure range: 700hPa～1060hPa
Note：The oxygen generator should be stored in a well-ventilated room without
strong sunlight, or corrosive gas inside. Avoid severe shock or turning the product
upside-down during transportation.
03 English
50 60Hz
/
～
th
1. Check After Unpacking
Before installing and operating the product, please check whether the appearance
of the product is intact, and whether the numbers of accessories are consistent
with the packing list in the manual. In case of any defects, please contact the
seller or manufacturer promptly.
2. Product Appearance
Figure 1 - Right side view
Note: It is normal that there is hot air discharged out of the heat dissipation vents.
Ensure smooth air flow of the air inlet and the outlet.
Installation and Use
Figure 2 - Left side view
English
04