Herunterladen Inhalt Inhalt Diese Seite drucken

Preparations Before Starting; Check The Drilling Equipment; Blow Out The Air Hose; Fill The Lubricator With Oil - Atlas Copco BBC16W Sicherheits- Und Betriebsanleitung

Vorschau ausblenden Andere Handbücher für BBC16W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 54
Safety and operating instructions

Preparations before starting

Check the drilling equipment

Check that all of the drilling equipment is in good
condition.
Check that the impact surface of the drill steel
shank is flat, with no signs of wear.
Make sure that the air inlet and exhaust ports are
free from obstructions.
Check that the flushing holes in the drill steel and
drill bit are not blocked, and that the flushing air
and water flows through without obstruction.
Make sure that the air filter (located in the air
nipple) is clean and not torn or distorted.
Ensure that the fittings are tight and leak-proof.
DANGER Whipping air hose
A compressed air hose that comes loose can lash
around and cause personal injury or death
Check that the compressed air hose and the
connections are not damaged.
Check that all compressed air connections are
properly attached.

Blow out the air hose

Every day before using the drill, blow out the air
hose to clear it of accumulated dirt and moisture.

Fill the lubricator with oil

Check that the chuck and insertion tool shank are
always covered with a film of oil.

Attaching the pusher leg to the rock drill

The pusher leg must be fixed to the rock drill by
means of the bayonet coupling.
18
www.CrowderSupply.com • Toll Free: 888-883-5144
© 2010 Atlas Copco Construction Tools AB | No. 9800 0627 71 | 2010-03-16
BBC 16W, 16WS, 34W, 34WS

Controls

Throttle lever

The rock drill is equipped with a throttle lever for
regulating both the compressed air to the percussion
mechanism and the flushing water.
Throttle valve closed (stop position).
A.
Blow-cleaning only.
B.
Air to pusher leg.
Flushing water.
C.
D.
Air to percussion mechanism.
Throttle lever fully open (full throttle).
E.
Extra blowing.
F.

Feed control lever

Adjust the feed force using the feed control lever as
follows:
Original instructions

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bbc16wsBbc34wBbc34ws

Inhaltsverzeichnis