Vaporesso XROS Nano Bedienungsanleitung Seite 5

2. Fill the E-liquid (Refer to FIGURE 2)
Snap off the mouthpiece then squeeze the e-liquid through filling slot. After filling,
put the mouthpiece back and make sure it's shut firmly.
*If it's the first time filling the e-liquid, please wait 5 minutes for the coil to prime.
3. Adjust Airflow (Refer to FIGURE 1)
There is an airflow control toggle on the side of the battery. Adjust the toggle
according to your vaping habits for different airflow effects.
4. Start Vaping
The device is draw-activated. Inhale through the mouthpiece and exhale to start
vaping.
5. Check the Battery Level
6. Charging
Please use the in-box Type-C cable to charge the device. The LED indicators will
breath while charging and stay on while fully charged.
PROTECTIONS
Low Resistance: Stop working → All LED indicators flash 5 times simultaneously.
High Resistance: Stop working → Current battery level indicators breath 3 times
gradually.
3 ENGLISH
80%-100%
60%-80%
30%-60%
30%≤