AVer MD330U Bedienungsanleitung Seite 37

Troubleshooting
This section provides useful tips on how to solve common problems while using this unit.
There is no picture on the output screen.
1. Check all the connectors again as shown in this manual.
2. Verify the setting of the display output device.
The picture on the output screen is distorted or the image is blurry.
1. Reset all changed settings, if any, to the original manufacturer default setting. On the remote
control, press Menu > Factory Default > On.
2. Use the Brightness and Contrast menu functions to reduce the distortion if applicable.
3. If you discover that the image is blurry or out of focus, click the Auto Focus button on the Web
setup page (Live View > Camera Control).
27