AVer MD330U Bedienungsanleitung Seite 18

3. USB Connection: Connect the camera to a desktop or laptop for video transmission when using
other video conference software such as Skype or Teams. (Note 1)
4. Video Output Connection: Connect the camera to a TV or monitor to display video output. (Note
1 and Note 4)
5. Storage Connection: Insert a microSD card into the card slot. You can save the captured images
or recordings to the microSD card. (Note 1 and Note 2)
6. RS-232 Connection: Connect the camera to a Joystick or laptop to control the camera. (Note 1
and Note 3)
7. Power Connection: Connect the camera to the power outlet using the supplied Power Adapter &
Power Cord. Before power-on the unit, ensure the Camera Head cable has been connected to the
USB Type-A port (refer to Step 1).
[Note]
1. Accessory equipment connected to the analog and digital interfaces must be in compliance with
the respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing equipment,
IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for
medical equipment.) Furthermore all configurations shall comply with the requirements of the
system in standard IEC 60601-1. Everybody who connects additional equipment to the signal input
part or signal output part configures a medical system, and is therefore, responsible that the
system complies with the requirements of the system in standard IEC 60601-1. The unit is for
exclusive interconnection with IEC 60601-1 certified equipment in the patient environment and IEC
60XXX certified equipment outside of the patient environment. If in doubt, consult the technical
services department or your local representative.
2. Please insert a microSD card to the card slot before using the Snapshot or Recording functions. To
access the microSD card, please refer to Mass Storage in the <System> chapter for more details.
For the recommended microSD cards, please refer to the <Suggested SD Cards> chapter.
3. For RS-232 connection, you can optionally purchase the RS-232 Adapter (3.5mm to D-Sub 9-pin).
The PIN definition is shown as below.
4. The camera and the connected TV or monitor must have grounding design. Please use the
supplied Power Adapter & Power Cord in the package for the camera. Ensure the power supply
cable of the TV or monitor supports the grounding plug.
8