AVer MD330U Bedienungsanleitung Seite 31

Video & Audio
You can configure video and audio settings on this page.
【Video Setting】
 Power Frequency: Select 50Hz, 59.94Hz or 60Hz based on your region.
 Video Output Resolution: Select a resolution to display on your video output device.
60Hz: 1080p/60, 1080p/30, 720p/60, 720p/30.
50Hz: 1080p/50, 1080p/25, 720p/50.
59.94Hz: 1080p/59.94, 1080p/29.97, 720p/59.94.
 Video Mode: Stream Only, USB Only, or USB + Streaming.
 Stream Video Output: Select a stream resolution on live view. Options include 3840x2160,
1920x1080, 1280x720, 640x480 or 640x360.
 Framerate: Select a framerate for live stream – 1, 5, 15, 20 or 30 for power frequency 59.94Hz or
60Hz; 1, 5, 15, 20 or 25 for power frequency 50Hz.
 Bitrate: 512kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps, 16Mbps, 32Mbps or Auto.
 I-VOP Interval (S): Move scroll bar to set the value – 1s to 10s.
 Rate Control: Select VBR or CBR.
 Encoding Type: Select H.264 or H.265.
【Audio Setting】
 Audio Output Device: Select an audio source for the audio output. Speaker, HDMI or Both.
 Microphone Volume: Adjust the microphone volume.
 Speaker Volume: Adjust the speaker volume.
 Beamforming Type: Select from 30°, 50°, 70°, 90°,
 Sampling Rate: Select from 8K, 16K, 24K, 32K, 44.1K or 48K.
 Noise Suppression: Select from Off, NR, NR+BF, NR Strong or NR DSP.
 AEC: Select On or Off.
 Encoding Type: Select AAC.
110° or 130°.
21