Dispenser pump registration
^ Access the Operating level (supervisor mode).
Select menu item Settings, Dosage calibration, Dispenser pump 1.
^ Place the dispenser pump output (pressure) hose in a measuring beaker.
^ Press button 0/1 (the pump runs for 60 s).
^ Read off the dispensed quantity in the measuring beaker. Enter this figure in the
display V: . . . . ml.
^ Press the "Save" button S, select the next pump and repeat.
Empty signal registration
^ Select menu item Dispenser level reminder.
Select dispenser pump 1 and change option from No to Yes. Select the next pump and
repeat.
M.-Nr. 06 459 993/00
5