Philips Sonicare Cordless Power Flosser 3000 Serie Bedienungsanleitung Seite 12

12
English
Filling the Reservoir
3 Connect the USB-A cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.
4 The battery indicator flashes while charging (see
'Charging').
Note: It can take up to 8 hours to fully charge the battery,
but you can use the Cordless Power Flosser before it is
fully charged.
Note: Replace the charging port cover on the Cordless
Power Flosser when not actively charging.
Fill the reservoir with lukewarm water. There are two easy
ways to fill the reservoir.
Note: When filling reservoir, do not exceed the max fill
line.
Note: Remove the charger from the Cordless Power
Flosser prior to filling the reservoir and using the device.
Option 1:
Lift the flip top to the side of the reservoir and fill the
reservoir through the quick side fill port.
Option 2:
1 Twist to detach the reservoir and fill the reservoir
through the wide mouth opening.
2 Fill the reservoir.