High Efficiency Particulate Air Filter Replacement - TREND AIRPRO MAX Gebrauchsanleitung

High efficiency particulate air filter replacement

When the status indicator LED illuminates RED, further investigation is required
regarding condition of a filter and a battery. If no fault on battery has been found, the
high efficiency particulate (HEPA) filter must be replaced.
Install a new HEPA filter as shown in Figure 35-Figure 39 and Figure 7 on page 15.
Figure 35
Figure 37
SERVICING
Remove the respirator.
Turn off the respirator and open the
filter cover, by releasing the latches on
both sides of the respirator as shown in
Figure 35 – Figure 36.
Figure 36
Remove filter cover (Figure 37).
Remove contaminated HEPA filter,
odour filter/pre-filter and hood anti-
recirculation gasket, as applicable.
Dispose of contaminated items
according to local regulations.
AIRPRO MAX
31