Cleaning And Maintenance - EuroLite LED RGB Ribbon Bedienungsanleitung

Brightness +: Increasing brightness. Default is the brightest level.
- : Decreasing brightness.
Speed +: Increasing speed. Default is the fastest level.
- : Decreasing speed.
Mode
M1 Seven color flash
M2
M3
M4
Note: * This controller can be supplied with both 12V as well as 24V.
* If the input voltage is 12 V, then the controller transmits 12V as well.
* Please ensure, that LED RGB Ribbons with a voltage of 12V or 24V only are connected to this
RGB controller.
* Please do not connect LED RGB Ribbons of differing voltages.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable LED RGB
Ribbon in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
Description
Partial fade
Full fade
Loop
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
11/12 00051880.DOC Version 1.3