Werbung
Downloaded by: pm_clarallort on 13-07-2023 15:24 CEST
EN
(Original instructions)
12V Set
Cordless Minigrinder
CMG1205BC
Dear Customer,
Many thanks for trusting to Casals.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals Power
Tools, S.L. develops electric Power Tools for
the toughest jobs.
WARNING Read all safety warnings
and all instructions, illustrations and
specifications provided with this power
tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
PRODUCT DESCRIPTION AND
SPECIFICATIONS
DESCRIPTION
A
Chuck
B
Chuck decoration
C
Axis locking buttons
D
Speed regulator
E
Battery power indicator
F
On/Off Switch
G
Battery
H
Battery charging socket
I
Charger
J
Spanner
K
Chuck adaptors
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
CHARGING THE BATTERY
Caution: A new battery is not fully charged
and must therefore be charged before the
appliance is used for the first time.
Charge the battery at an atmospheric
temperature of between 4 and 40ºC.
Plug the charger (K) into the mains.
A pilot light will come on to indicate that the
charger is ready to begin charging the battery.
Approximately 3 to 5 hours are needed for
a complete charge of the battery. Never
attempt to over charge the battery (although
it is recommended that the first charge of the
battery be of 5 hours in duration).
Insert the battery into the charger.
Connect the charger (K) to the jack using the
socket on the appliance. The socket is located
at the lower/back part of the battery.
The pilot light will come on to indicate that the
charger is charging the battery.
At the end of the time period specified above,
remove the battery from the charger.
When the battery is charged disconnect the
charger from the mains supply.
Werbung
