Werbung
Downloaded by: pm_clarallort on 13-07-2023 15:24 CEST
The vibration and noise emissions during
actual use of the power tool can differ from
the declared values depending on the ways
in which tool is used especially what kind of
workpiece is processed.
It's necessary to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running idle
in addition to the trigger time).
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT
IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations of
substances that could be considered harmful to
the environment.
This symbol means that in case you
wish to dispose of the product once
its working life has ended, take it to
an authorised waste agent for the
selective collection of Waste from
Electric and Electronic Equipment
(WEEE).
This symbol means that product
may include a battery or batteries;
user must to remove them before
disposing of the product.
Remember that batteries must be
disposed of in duly authorised
containers. Do not dispose of them in fire.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
To remove the batteries, once the life of the
appliance has ended, proceed as follows:
Open the bottom shell of the battery, removing
previously with the help of a screwdriver fixing
screws.
With the help of some clamps, remove the
battery from the iside.
Identify the battery wires and cut their (Red and
Black). To avoid risks of a short circuit with a
possible residual battery load, first cut the Red
wire and protect it by using insulating tape,
then proceed to cut the black wire proceeding
in the same way. (Fig. 1).
Safely remove the battery from its housing.
Dispose the batteries according to your
national waste disposal rules.
Werbung
