Abbreviations - EMH metering EM4TII Bedienungsanleitung

Terminal cover
To prevent any unauthorised access to the connection terminals,
the terminal cover is attached with sealing screws which you can secure
with seals.
ATTENTION
Application of excessive torque will damage the device!
Tighten the sealing screws to a maximum torque of 0.5 Nm.

Abbreviations

AC Alternating Current
ADC Analog Digital Converter
CH Channel
DC Direct Current
DIN Deutsches Institut für Normung e.V.
(German Standardisation Institute)
EN European Norm
FW Firmware
GND Ground (electric ground, reference potential)
GPS Global Positioning System
I Current
IEC International Electrotechnical Commission
LC Liquid Crystal
LED Light Emitting Diode
NMEA National Marine Electronics Association
OBIS Object Identification System
PEMG Prolan Energy Meter Gateway
V Voltage
35