Profi-AirBrush AB01117 Bedienungsanleitung Seite 5

8. MAINTENANCE
The maintenance and servicing work must be carried out according to our operating instructions, the corresponding
safety regulations must be observed.
The airbrush has to be cleaned IMMEDIATELY after use with suitable solvents and dry with compressed air.
No deposits may form in the gun. In the presence of any external deposits in the airbrush gun and a dama-
ge picture, which can be attributed to it, the claim for legal warranty does not apply.
l Change the nozzle set
Always change the complete nozzle set if you want to change the nozzle size. These parts, consisting of nozzle
and color needle, are supplied as a complete set. Mount the ink nozzle before inserting the color needle.
The following checks should be carried out regularly:
l Clean guide lines (e.g., no bend)
l Check for leaks
9. SAFETY INSTRUCTIONS
l Keep away from children! It's not a toy!
l T he airbrush gun must not be operated by persons under the influence of alcohol, drugs or medication.
l I t is NOT recommended to carry out any technical modifications on your own. Firstly, it is not ensured
whether this modification is technically flawless, in addition, the guarantee claim is forfeited.
l Observe the ambient temperature between +5 and + 40 ° C
l Never pull the hose
l N ever expose the appliance to dust, acid, vapors, explosive or combustible gases or atmospheric agents
(rain, sun, fog, snow).
l Avoid cross-sectional constriction in the hose or cable
l The airbrush gun must not be used if it is damaged.
The manufacturer declares,
l N o responsibility in the case of accidents or damages resulting from negligence or disregard of the instructions in
this manual
l Reject any responsibility for damage resulting from improper use of the equipment
10. GUARANTEE REGULATIONS / STATUTORY WARRANTY
The statutory guarantee (new and unused goods) exists for all manufacturing and material defects. In such cases we
accept the exchange or repair of the airbrush gun.
Shipping costs and consequential damages are borne by us only insofar as we are legally obliged to do so.
We provide our services in Germany. Return costs from abroad can only be accepted insofar as we are legally
obliged to do so in Germany (or as far as EU law is applicable in Germany).
The warranty does not apply to:
l Material wear (e.g., gaskets)
l Unjustified interventions or changes in the airbrush gun
l Damages by selffault
l Improper servicing and improper use
l Not performed cleaning / dried paint
Moreover, we give no damage compensation for secondary damages!
English 5