Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 English
6. COMMISSIONING
6.a Connect the airbrush gun to the pressure hose (illustrations as an example and depending on airbrush model).
6.b Then screw the air hose with airbrush gun to a suitable compressor. (Illustrations as an example and depending on the
compressor model).
6.c Fill the container of the airbrush gun with an appropriately diluted color.
7. CLEANING AND CARE
l R inse the gun's paint dispensers with water or thinner, depending on the paint used.
l C lean the air nozzle with a brush or a brush. Do not immerse the nozzle in thinner.
l T o clean the nozzles, use only the appropriate cleaning needles. Under no circumstances try to clean clogged
openings with improper objects, since even the slightest damage can cause a change in the spray performance.
Your airbrush gun must be thoroughly cleaned after every color change. The gun should be regularly clea-
ned, depending on the paint used, with a suitable thinner, AEROCLEAN RAPID from Schmincke (available
in the profi-airbrush-shop) or water.
Especially the nozzles, which are subject to wear, remain functional by careful cleaning longer.
Werbung
