8.6 Totalization
The display unit offers an option that allows the addition of weighing values and the
display of the total weight.
Pick up the load and bring it to reference height
Press
. The value is stored and „M" is
displayed.
The display alternately shows the consecutive
number (number of weighings) and the total weight.
After a few seconds the system automatically reverts
to standard weighing mode.
Add-up another load as described before. Observe
that the system must be unloaded between the
weighing procedures.
8.7 Display stored weighing data
Press
and the total weight are displayed alternately
8.8 Delete the saved weighing data
During display of the weighing data press
deleted, the display changes automatically into weighing mode and the „M"
extinguishes.
20
for approx. 3 sec, the number of weighing procedures
(example)
Number of weighing
procedures
Total weight
shortly, data in the store are
VHE-A-BA-e-1812