8.3 Weighing
Switch on the pallet truck scale using
the balance carries out a selftest and changes then to
the zero display „0" is displayed flashing.
If „0" is not displayed, press
Let the pallet truck scale lower onto the lowest point.
Three arrows are lighting up when the lowest point is
reached.
Take up the load and lift till to reference height. Three
arrows are lighting up. The weight value is displayed
flashing. Continue lifting the load.
Two arrows are lighting up. Lift slowly
A arrow is lighting up. Lift slowly.
The reference height is reached. The symbol
displayed. The display of the weight value does not
more flash.
The upper arrow is lighting up, when a load has been
lifted too high up. Lower the pallet truck scale
completely till to the ground to start a new weighing.
18
key,
is
VHE-A-BA-e-1812