8.4 Zero point correction
Switch on pallet truck scale using
Check whether the forks of the pallet truck scale are
empty
Lift pallet truck scale till to the reference height (see
chap. 8, fig. 1).
If the display does not show zero, reset display using
8.5 Taring
Lift weighing container till to the reference height (see chap. 8, fig. 1).
Switch on pallet truck scale using
The weight of the weighing container is displayed.
Tare using
Fill material to be weighed in the container, the net
weight is displayed.
If the container is removed from the balance, the tare
weight is displayed as a negative value. The tare
weight remains stored until the
pressed anew or the balance is switched off.
VHE-A-BA-e-1812
button.
button is
button.
button.
19