Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
Addressing
Press the MODE button until the display shows DMX MODE.
Press the ENTER button and the display shows: 001.
Set the desired address via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to select a DMX Channel Mode.
DMX Channel Selection : Choosing a DMX Channel Mode up to 16 Channal Occupation
After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode.
(3 CH, 5 CH, 12 CH, 15 CH, or 16 CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm and to exit the DMX Mode.
Please see the following DMX protocol graphic for the respective channel values.
DMX-Protocol
The LEDs of the devices are separated into 4 spots (segments) which can be controlled in the following 4
different modes.
3-channel mode
Channel:
Value:
CH 1
000-255
CH 2
000-255
CH 3
000-255
5-channel mode
Channel:
Value:
1
000-255
2
000-255
3
000-255
4
000-255
000-000
001-005
5
006-010
011-255
12- Channel mode:
Each segment as 1 group, 4 groups in total
Channel: Value:
1
000-255
2
000-255
3
000-255
4
000-255
5
000-255
6
000-255
7
000-255
8
000-255
9
000-255
10
000-255
11
000-255
12
000-255
Function:
Red (0 - 100 %)
Green (0 - 100 %)
Blue (0 - 100 %)
Function:
Red (0 - 100 %)
Green (0 - 100 %)
Blue (0 - 100 %)
Dimmer (0 - 100 %)
On
Sound control (7 colors)
On
Strobe (with increasing speed)
Function:
RED 1
GREEN 1
BLUE 1
RED 2
GREEN 2
BLUE 2
RED 3
GREEN 3
BLUE 3
RED 4
GREEN 4
BLUE 4
26/28
00079928, Version 1.0
Werbung
