Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE about the hearing protection function; a display warning pops -up
on the screen, or a beep warning can be heard from the earphone every
time you increase the volume and reach to the default setting level 12
which may exceed 85dB limit. Press the
and continue increasing the volume by pressing +.
Bluetooth Audio Transmission
To Turn On the Bluetooth Function:
• From the main menu, choose the Bluetooth function by using
and
buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
• Keep the device within a 1 meter range of your Bluetooth receiver
device. Power it On and set it into searching / pairing mode;
• Turn the BT On in "BT Control" menu.
• Then, in the Bluetooth list menu choose "Search Device" by using the
and
/
approximately 10 ~ 20 seconds. Devices found will be listed on the
screen.
• Choose your device from the on screen list and choose "Pair /
connect" by using the
devices should be paired and a Bluetooth icon "
display indicating the Bluetooth connection is ok. If the connection is
lost the color of the Bluetooth symbol will change to grey.
• Choose "Folders & songs" in the Music menu list to directly select your
favorite music.
• "The player will switch to the "Now Playing" screen. You now can
select Previous / Next / Play / Pause and adjust volume by using the
and
/ ,
• To exit the Bluetooth Transmission function, press the
until you see the main menu icons. Select the Bluetooth menu. Select
'BT control' from the list and select 'Turn BT off' .
buttons, the device will start searching
and
/
/
buttons.
button to accept the warning
button. Wait a few seconds, both
5
" will show on the
button
/
for
Werbung
