Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Dangers that may arise
from using the tool
Before each use, check the HAZET tool for
full functionality. Do not use the tool if its
functionality cannot be ensured or if damage
is detected. If you use the tool despite full
functionality not being guaranteed, this poses
a risk of serious injury, health problems and
material damage.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or hous-
ing parts.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect working
order.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
2
For your safety
Immer persönliche Schutzausrüstung tragen!
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
• Wear working gloves and
safety glasses.
Pneumatic tools can dis-
perse
chips,
dust
other
abraded
at high speed which may
result in severe eye injuries.
Compressed air is dan-
gerous. The air flow may
cause harm to sensitive parts
of the body like eyes, ears,
etc. Dust and objects being
raised by the air flow may
cause injuries.
• Wear hearing protection.
Long exposure to the work-
ing noise of pneumatic tools
may result in permanent hear-
ing loss.
• Wear a face mask or breath
ing protection. Breathing in
the vapour of some materials
like adhesives and chemi-
cals containing tar can, over
a prolonged period, cause
serious harm.
• Wear tightfitting protective
clothing. Tools with moving
parts can get caught in your
hair, clothes, jewellery or
other loose objects, which
can lead to serious injury.
Never wear clothing that is
too loose and/or clothing with bands or
loops, etc. which may get caught in the
moving parts of the tool. During the work,
take off jewellery, watches, identification
tags, bracelets, necklaces etc. that could get
caught in the tool. Never touch the moving
parts of a tool. Long hair should be tied back
or covered.
• Keep pneumatic tools out of the hands
of children. Unattended tools or tools that
are connected to the compressed air supply
may be used by unauthorised persons and
could injure them or other persons.
and
particles
13
Werbung
