Seco GOLIATH GC 92 Bedienungsanleitung Seite 87

} We recommend mowing in the parallel or cross direction. Covering the previous coverage of the
machine increases the effectiveness of the blades and will improve the appearance of the mowed
area.
} When travelling over uneven terrain the travelling speed may fluctuate.
5.5.4 Travelling on a slope
Riding mowers models GC 92 and GC 110 and GC 132 can
work on slopes with an incline of up to 22° (40%).
When working on a slope it is necessary to adhere to the
following fundamentals:
} Pay increased attention when travelling on a slope.
} Always use a lower travelling speed and regulate the
travelling speed by moving the driving lever
} Only travel perpendicular to the contour, i.e. up and
down. Travelling in the direction of the contour is possible
with extra attention only when turning the machine. If at
all possible, avoid travelling along the contour.
} When turning ensure that a wheel does not drive over an
elevated obstacle (rock, tree root, etc.)
} Travel slower when travelling down a slope or over
obstacles. Pay special attention when turning and turning
around on slopes.
} If you stop on a slope, always use the parking brake.
When overloading the machine by travelling on slopes over 18° there is a risk of serious
damage to the gear box. The manufacturer is not responsible for damage caused in this
way.
87
Right
Wrong