Seco GOLIATH GC 92 Bedienungsanleitung Seite 101

6.4 Lubrication
Lubricate the machine according to the following lubrication diagram.
Ball bearings of the tension pulleys, guide pulleys and bearings on the mowing deck are self-lubricating.
Before putting the machine out of service for an extended period, thoroughly lubricate all places shown
on the diagram. Namely the half axle of the front and rear axle (it is necessary to remove the rear
wheels).
Symbol Explanation
Plastic lubricant and grease
Oil SAE 30
6.4
Interval in hours
10 50
Plastic lubricant is used to lubricate:
} steering segment - using a lubricating nipple
} mowing deck lifting arms - using a lubricating nipple
} tensioning pulley - remove, lubricate
} central pivot pin of the front axle - using a lubricating nipple
} angle joints connecting the steering draw bars - remove, lubricate
} front wheel half axles - the interval is 10 hours!
Pivot points are lubricated with oil:
} differential lock pedal
} brake pedal
} travel levers
Grease is used to lubricate:
} front and rear wheel half-axles – grease A00
101